Alignment of asphalt pavement is vital for smooth, clean driving. Just as repairs to any other type of road surface, a well-planned and performed asphalt maintenance project will maintain the overall quality of your asphalt road.
Once your asphalt pavement has been laid, the first layer is the original concrete slab that was laid in place. The concrete slab then forms the base for the first layer of asphalt. Then, the cement and gravel are combining to form the second layer of asphalt, which is known as the top layer.
The final asphalt layer consists of smaller aggregate like pea gravel, aggregate slurry, gravel, or the fine aggregate. This all-purpose compound can also be treated to improve its performance. This asphalt, especially when it is applied over gravel or sand, can be repaired in an extremely short time.
From mild cleaning to severe ones, asphalt repairs can be performed with ease. On occasion, even this can be done by an amateur, and they will call themselves a “road-building contractor”. However, what most contractors fail to realize is that asphalt is a material that is built to withstand a great deal of wear and tear.
Asphalt is a very tough, durable material that will not show any signs of wear or tear after a specific period of time. However, there are many types of asphalt that are used on roads. Some of the common asphalt types are the asphalt repair and concrete mix.
When asphalt is used for the concrete mix, the top and bottom layers are constructed of concrete, but the middle layer is the asphalt. The area between the asphalt and the concrete is called the “grout”. This grout serves as a backing for the concrete. Because it is a more resilient material, this layer requires less maintenance.
When there is a need for the asphalt repair, the most popular and commonly used repair method is to apply another layer of concrete. This is often done after some form of weathering has taken place. Asphalt does not get affected by various weathering processes. In fact, there are many drivers who claim that asphalt gets better results with the additional coat of concrete.
Another method is to use a synthetic sealant or polyurethane. Asphalt sealants are an environmentally friendly alternative. These sealants may also have an added benefit of anti-fungal properties that help eliminate the unsightly odor.
The next repair method for the asphalt repair is to seal the concrete and use the additive, urethane. Urethane has been known to improve the resistance of the asphalt from the damage caused by moisture. Most urethanes are high in silicone.
Sometimes, an Asphalt Repair Colorado Springs cannot be accomplished with the above methods. This is when the possibility of using a thermoplastic rubber or epoxy is considered. However, if the repair is done with the use of this material, it will only last up to about three years.
The repair has to be done so that the car will be protected from any damage. So, this type of repair has to be carefully done to avoid problems with the car. It is also important to keep in mind that there will be little room for error with asphalt repairs.
Even though they can be difficult and require a large amount of work, they are generally considered to be safe and reliable in the long run. Any kind of asphalt repair can be done easily and cheaply. And in a short period of time, it can look completely new.